1.Motor reducing gear is used on rotation device in the feeding box 360° quick rotation.
2.Four terminal input vibrators are used on the vibration table.Special design for vibration table stand to make exciting force equally distributed,and all products height keep accordant and forming faster.
3.VFDs motors are used to control the vibration table amplitude and frequency to fit for different moulds and products.
4.Air suspensions are used on the mould box,Adjustable damping can reduce working noise and prolong the machine service life.
5.PLC intelligent control and man-machine interface system can do radom signal analysis,fault diagnosis and parameter setting during the whole process and insure the machine keeps best working effect. Main Technical Parameters：
| Type || Cycle Time (s) ||Pallet Size (mm) || Power (kw) || Weight (kgs) || Dimension (mm) |
| QT10-15 || 12-18 || 1100*850 ||56 || 13800 || 7200*2300*2800 |
|Type ||Block Size (mm) ||Pcs/pallet ||Pcs/hour ||Pcs/8hours |
| Hollow block ||400x200x200 || 10 || 2400 || 19200 |
| Standard bricks || 240x115x53 || 48 || 11520 || 92160 |
| Ground paver || 200x100x60 || 28 || 5580 || 44640 |